PRODUCTION EQUIPMENT

Configurable indexing gears

Configurable indexing gears

IP series

Characteristic:

  • number of cycles from 0.6 to 10
  • indexing angle from 60° to 330°
  • dynamic load from 13 to 4500 Nm
  • maximum axial force on the output bearing from 500 to 21000 N
  • maximum bending moment from 20 to 2400 Nm
  • flat cam system, CNC machined, inductively hardened
  • aluminium body
  • hermetic casing enabling work in any working position
  • splash lubrication
  • shafts mounted on roller bearings with initial tension
  • can be equipped with a reducer, three-phase motor with brake, cams with inductive sensors, electronic cam and overload clutch

IT series

Characteristic:

  • number of cycles from 2 to 32
  • indexing angle from 90° to 360°
  • dynamic load from 10 to 5500 Nm
  • maximum axial force on the output bearing from 1000 to 45000 N
  • maximum bending moment from 10 to 650 Nm
  • the possibility of leading connections to the table disc through a through hole in the body, from 5.8 to 89.8 mm
  • cylindrical system of cams, CNC machined, hardened
  • aluminium or cast iron body
  • large output flange for easy mounting of the plate with details, additionally supported by a roller bearing with initial tension
  • hermetic casing enabling work in any working position
  • splash lubrication
  • can be equipped with a reducer, three-phase motor with brake, servo drive, cams with inductive sensors, electronic cam and overload clutch
  • transmission of the drive directly from the gear motor to the input shaft or operation in an integrated drive system

TR series

Characteristic:

  • number of cycles from 2 to 30
  • indexing angle from 90° to 360°
  • dynamic load from 60 to 40000 Nm
  • maximum axial force on the output bearing from 18,000 to 480,000 N
  • maximum bending moment from 400 to 10000 Nm
  • the possibility of leading connections to the table disc through a through hole in the body, from 12 to 320 mm
  • cylindrical system of cams, CNC machined, hardened
  • aluminium or cast iron body
  • large output flange facilitating fixing the plate with details, additionally supported by a rolling bearing with initial tension
  • hermetic casing enabling work in any working position
  • splash lubrication
  • can be equipped with a reducer, three-phase motor with brake, servo drive, cams with inductive sensors, electronic cam and overload clutch
  • transmission of the drive directly from the gear motor to the input shaft or operation in an integrated drive system

HT series

Characteristic:

  • number of cycles from 4 to 36
  • indexing angle from 75° to 300°
  • dynamic load from 700 to 20000 Nm
  • maximum axial force on the output bearing from 130,000 to 500,000 N
  • maximum bending moment from 16000 to 122000 Nm
  • large through-hole enables the implementation of unusual applications from 340 to 700 mm
  • cylindrical system of cams, CNC machined, hardened
  • cast iron body
  • hermetic casing enabling work in any working position
  • splash lubrication
  • can be equipped with a reducer, three-phase motor with brake, servo drive, cams with inductive sensors, electronic cam and overload clutch
  • transmission of the drive directly from the gear motor to the input shaft or operation in an integrated drive system

HTR series

Characteristic:

  • configurable number of cycles and indexing angle
  • dynamic load from 60 to 400 Nm
  • maximum axial force on the output bearing from 18,000 to 56,000 N
  • maximum bending moment from 500 to 3200 Nm
  • the possibility of leading connections to the table disc through a through hole in the body, from 35 to 85 mm
  • cylindrical system of cams, CNC machined, hardened
  • cast iron body
  • hermetic casing enabling work in any working position
  • splash lubrication
  • indexing unit dedicated to work with the servo drive

HP series

Characteristic:

  • number of cycles from 1 to 12
  • indexing angle from 30° to 180°
  • dynamic load from 55 to 250 Nm
  • maximum axial force on the output bearing from 13,000 to 30,000 N
  • maximum bending moment from 500 to 1500 Nm
  • smallest indexing angle, longest mechanical downtime
  • output flange facilitating fixing the plate with details, additionally supported by a roller bearing with initial tension
  • hermetic casing enabling work in any working position
  • splash lubrication
  • CNC machined cams, hardened
  • can be equipped with a reducer, a three-phase motor with a brake, cams with inductive sensors or an electronic cam
  • transmission of the drive directly from the gear motor to the input shaft or operation in an integrated drive system

FT series

Characteristic:

  • number of cycles from 6 to 36
  • dynamic load from 1600 to 300000 Nm
  • maximum axial force on the output bearing from 45,000 to 92,000 N
  • maximum bending moment from 8500 to 44000 Nm
  • large through-hole enables the implementation of unusual applications from 160 to 1000 mm
  • four output flange bearing points
  • sealing system enabling operation in any working position
  • innovative cam arrangement
  • reduced coefficient of friction
  • splash lubrication
  • cast iron body
  • can be equipped with a reducer, a three-phase motor with a brake, a servo drive, cams with inductive sensors or an electronic cam

IG/IGA series

Characteristic:

  • number of cycles from 1 to 24
  • indexing angle from 90° to 270°
  • dynamic load for IG: from 60 to 10000 Nm, for IGA: from 40 to 300 Nm
  • maximum axial force on the output bearing for IG from 40 to 300 N
  • maximum bending moment from 150 to 2400 Nm
  • sealing system enabling operation in any working position
  • IGA version has an output shaft, IG a flange
  • splash lubrication
  • can be equipped with a reducer, three-phase motor with brake, cams with inductive sensors, electronic cam and overload clutch
  • transmission of the drive directly from the gear motor to the input shaft or operation in an integrated drive system

Our warehouses

JAGODNIK

Jagodnik 17 C, 58-100 Świdnica
tel. (+48) 74 853 47 15
fax. (+48) 74 857 41 25
email: ams@ams-at.pl

PSZCZYNA

Korczaka 11, 43-200 Pszczyna
tel. (+48) 885 022 101
email: pszczyna@ams-at.pl

CONTACT DATA

Do you need help in choosing the right assortment?

Leave us your details and phone number and we will contact you or call/text us directly:

tel. (+48) 74 853 47 15
email: ams@ams-at.pl






    The administrator of your personal data is AMS Sp. z o. o. Jagodnik 17C, 58-100 Swidnica. Your personal data will be processed in order to make contact pursuant to Art. 6 para. 1 lit. f GDPR as the justified interest of the administrator. More information on the processing of your personal data can be found in information clause

    Ta strona używa ciasteczek

    Używamy plików cookie, aby zapewnić najlepszą jakość korzystania z naszej strony. Pomóż nam zapewnić bezpieczeństwo naszej witryny i spersonalizowane doświadczenia, akceptując pliki cookie.